APART Audio AUDIOSYSTEM 8.8

  • APART Audio AUDIOSYSTEM 8.8
  • APART Audio AUDIOSYSTEM 8.8
  • APART Audio AUDIOSYSTEM 8.8

APART Audio AUDIOSYSTEM 8.8
Levertijd enkele dagen

AUDIOSYSTEM8.8, combined Audio matrix with 4 built-in FM tuners, 8 inputs & 8 outputs

Artikelcode: Audiosystem 8.8
1996.50
incl. 21% btw

Apart Audio AUDIOSYSTEM8.8, comb Audio matrix with 4 built-in FM tuners, 8 inputs & 8 outputs
Klik HIER voor downloads en info
Although it can look quite simple, a small multi-zone installation is not always an easy or small job for the installer. He needs to install and connect many electronic units (sources, amplifiers, wall panels...) in order to provide the perfect audio solution for his customer. With Apart’s AUDIOSYSTEM8.8 the installer now can propose a complete audio system to his customers that covers many small or medium sized applications... with just one unit!
Click here for the introduction movie
The Made in Belgium AUDIOSYSTEM8.8 audio matrix has 8 speaker outputs (4 stereo or 8 mono zones) with each a built-in 30 watts digital amplifier and also has 4 additional line outputs. The unit has 4 FM radios built-in and it has 4/8 stereo/mono line inputs. Out of the box the AUDIOSYSTEM8.8 is configured with 4 stereo inputs en 4 stereo output zones.
The installer/customer can easily access the integrated web server based GUI to configure and/or control the audio system. AUDIOSYSTEM8.8 can be remote controlled via the DIWAC wall panels, but thanks to the web server based GUI also via any mobile device (smartphone, tablet) or computer that has a web browser installed. Browse to the correct url and when the GUI opens, it’s a piece of cake to select your source and control the volume of your zone.
As AUDIOSYSTEM8.8 is a perfect solution for many retail (or corporate) applications, the unit has been equipped with an emergency mute contact. In a shopping mall for example all retail stores should be connected to the central PA system. When connected via this emergency mute contact, the emergency messages coming from the central audio system will overrule the music in the shops when needed. Furthermore AUDIOSYSTEM8.8 has an all call paging functionality and a party mode function. On the DIWAC wall panels, an ALL OFF button can be selected to shut down the entire audio system.
The applications for AUDIOSYSTEM8.8 are almost endless: doctor or dentist cabinets, supermarkets, bars and restaurant, office buildings, hotels, sport centres, wellness areas or schools... AUDIOSYSTEM8.8 stands for easy configuration, straight forward control into endless applications!
Specifications:
  • 19" (483 mm wide) rack mounting
  • depth (build in): 308 mm
  • height- rack units (1U=44 mm): 1 U
  • power consumption (max): 150 watts
  • output level unbalanced (dB): 10
  • zone outputs        8 configurable
  • SPDIF output: No
  • total harmonic distortion TBH (%): <0.06
  • music level control: Yes
  • signal to noise level SNR (dB): >95
  • crosstalk (dB): >83
  • MIC inputs unbalanced:  0
  • Phantom power voltage: N/A volts
  • selectable input dynamics: No
  • line input balanced: 0
  • line input SPDIF: No
  • RS232 (serial communication port): No
  • priority input contact: Yes
  • chime: Yes selectable
  • priority output contact: No
  • frequency response (in Hz): 20 - 30K
  • applicable low impedance: Yes
  • inputs with Phantom power: 0
  • noise gate on MIC: No
  • selectable output dynamics: No
  • line input unbalanced: 8 configurable
  • tone control: Yes
  • wall panel controls: Yes
  • maximum qty paging Mics: 3
  • emergency input: Yes
  • priority levels: 2
  • FM tuner: 4
  • priority switch: 2
  • ethernet control: Yes
  • cooling system: fan
  • applicable in 100V: Yes
  • dynamic output power        8 x 30 watts
  • output power RMS 8 ohms: 8 x 30 watts
  • minimum impedance load: 6 ohms